LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1991 >> Pickup Base, W55 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 4-CYL >> Ignition Checks >> Diagnostic Codes >> Code 13 (No RPM Signal)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Code 13 (No RPM Signal)

ECU will store Code 13 in memory if it does not receive signal from NE pick-up coil (RPM) terminal when engine speed is above 1000 RPM.

scientia non olet · About LEMON Manuals