LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1991 >> Supra 7M-GE, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor (Non-Turbo) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Distributor (Non-Turbo): Installation

  1. Install new "O" ring into distributor housing. Coat "O" ring with oil. Align groove on distributor housing with protrusion on top of drive gear teeth. SeeFig 1
  2. Insert distributor, aligning center of distributor flange with bolt hole on cylinder head. Connect distributor wiring connector. Install spark plug wires. Connect negative battery cable. Set ignition timing. Tighten distributor hold-down bolt. See TORQUE SPECIFICATIONS .
Fig 1: Aligning Distributor Installation Marks (Non-Turbo)
G119502Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals