October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition System: Distributor: Installation
- Install new "O" ring into housing. Coat "O" ring with oil. Align protrusion on distributor housing with groove of coupling side. See Fig 1. Insert distributor with flange aligned with nut on valve cover. See Fig 2.
- Connect spark plug wires and vacuum hoses. Connect distributor wiring connector. Connect negative battery cable. Set ignition timing. Tighten distributor hold-down bolt. See TORQUE SPECIFICATIONS at end of article.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002