LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1992 >> Celica ST, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump: Installation

  1. To install, reverse removal procedure. Use NEW retaining clip to install filter. Use NEW gasket between fuel pump bracket and tank. Tighten fuel pump bracket-to-tank nuts to 26 INCH lbs. (2.9 N.m).
  2. After installing fuel tank to body, install NEW gasket to fuel sender gauge before installing fuel sender gauge to tank. Tighten fuel sender bracket-to-tank nuts to 13 INCH lbs. (1.5 N.m). Turn ignition on and check for fuel leaks.
scientia non olet · About LEMON Manuals