LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1993 >> Celica All-Trac >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump: Installation

  1. Use NEW retaining clip to install filter. Use NEW gasket between fuel pump bracket and tank. Tighten fuel pump bracket-to-tank nuts to 26 INCH lbs. (2.9 N.m). Install fuel evaporation bent tube. Tighten fuel evaporation bent tube-to-tank retaining screws to 13 INCH lbs. (1.5 N.m). Tighten fuel evaporation bent tube-to-fuel pump bracket to 26 INCH lbs. (2.9 N.m).
  2. Install fuel tank to body. Tighten fuel tank band nuts to 16 ft. lbs. (22 N.m). Install fuel hoses. Tighten outlet hose to 22 ft. lbs. (30 N.m). Install fuel sender gauge with NEW gasket. Tighten fuel sender bracket-to-tank nuts to 13 INCH lbs. (1.5 N.m). To complete installation, reverse removal procedure. Check for fuel leakage. See CHECKING FOR FUEL LEAKS .
scientia non olet · About LEMON Manuals