LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1993 >> T100 Base, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pressure Regulators >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Regulators: Installation

  1. Apply light coat of gasoline to NEW "O" ring and install onto pressure regulator. Push firmly to install pressure regulator into fuel rail. Turn pressure regulator counterclockwise until fuel return pipe points 90 degrees from fuel pipe, toward distributor.
  2. Verify regulator rotates smoothly to verify "O" ring seal is positioned properly. If pressure regulator does not rotate smoothly, remove it and replace "O" ring. Reinstall pressure regulator.
  3. Tighten lock nut to 22 ft. lbs. (30 N.m). To complete installation, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS. Connect fuel hose and vacuum hose to pressure regulator. Check for fuel leakage. See CHECKING FOR FUEL LEAKS.
scientia non olet · About LEMON Manuals