Indicator Light
Remove combination meter. Locate 16-pin "A" and 13-pin "B" connectors at rear of combination meter. Connect battery positive lead to terminal No. A14 (Light Green/Red wire) and battery negative to terminal No. B2 (White/Black ground wire). If indicator light does not come on, replace light. If indicator light comes on, inspect wire harness and connectors between indicator light and Anti-Theft System ECU. See TESTING ANTI-THEFT CIRCUITS. Repair harness or connectors as necessary. If harness and connectors are okay, replace Anti-Theft System ECU.
NOTE:
For other Anti-Theft or Door Lock components see appropriate DOOR LOCKS - POWER
article in the ACCESSORIES/SAFETY EQUIPMENT section.