LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1994 >> Camry XLE, 2.2 S >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

CAM POSITION SENSOR & DISTRIBUTOR TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Distributor Hold-Down Bolt
2.2L 5S-FE 14 (19)
3.0L 1MZ-FE 13 (18)
FUEL INJECTION TORQUE SPECIFICATIONS (2.2L)

Application Ft. Lbs. (N.m)
EGR Valve & Vacuum Modulator Pipe Union Fittings 43 (58)
Fuel Inlet Pipe (Pulsation Damper) 25 (34)
Fuel Return Pipe-To-Fuel Pressure Regulator 14 (19)
Intake Manifold Support Bolts
12 mm 16 (22)
14 mm 31 (42)
Intake Manifold-To-Cylinder Head Bolts/Nuts 14 (19)
Threaded Into Aluminum 16 (22)
Threaded Into Steel (Engine Block) 31 (42)
Knock Sensor 27 (37)
Throttle Body-To-Air Intake Chamber Bolt (1) 14 (19)
INCH Lbs. (N.m) 
EGR Valve Mounting Bolts 115 (13)
Fuel Pressure Regulator-To-Fuel Rail Bolt 48 (5.4)
Fuel Rail-To-Cylinder Head Bolt 115 (13)
(1) Throttle body bolts are of different lengths. Install 2 shorter bolts in top holes of throttle body.
FUEL INJECTION TORQUE SPECIFICATIONS (3.0L)

Application Ft. Lbs. (N.m)
Air Intake Chamber & Engine Hanger Support 29 (39)
Cold Start Injector Union Bolt 11 (15)
EGR Pipe Mounting Bolt 13 (18)
EGR Pipe Union Nut 43 (58)
Fuel Inlet Union Bolt-To-Filter 22 (30)
Fuel Pressure Regulator Lock Nut 16 (22)
Fuel Pulsation Damper-To-Fuel Rail 25 (34)
Fuel Pump Output Union Bolt 25 (34)
Fuel Tank Band Bolts 29 (39)
Intake Chamber-To-Manifold 32 (43)
Knock Sensor 27 (37)
No. 2 Fuel Pipe Union Bolts 25 (34)
INCH Lbs. (N.m) 
Air Pipe-To-Intake Manifold Bolt 74 (8.3)
Cold Start Injector Mounting Bolts 74 (8.3)
Fuel Pump Bracket Screws 39 (3.9)
Fuel Rail-To-Intake Manifold Bolts 115 (13)
Ground Straps 108 (12)
Idle Speed Control (ISC) Valve-To-Air Intake Chamber Bolt 115 (13)
Intake Air Control Valve (IACV) Mounting Nuts 115 (13)
Throttle Body-To-Air Intake Chamber Bolt (1) 115 (13)
(1) Throttle body bolts are of different lengths. Install 2 shorter bolts in top holes of throttle body.
FUEL PUMP TORQUE SPECIFICATIONS

Application INCH Lbs. (N.m)
Fuel Pump Bracket Retaining Screws 35 (3.9)
THROTTLE BODY TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
2.2L (1) 14 (19)
3.0L 10 (13)
(1) Throttle body bolts are of different lengths. Install 2 shorter bolts in top holes of throttle body.