LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1994 >> Celica ST, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Overhaul (1.8L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Overhaul (1.8L)

  1. Remove 3 bolts and distributor cap. Remove rotor, dust cover and gasket. Remove 2 nuts, and disconnect 4 wires from ignition coil terminals. Remove 4 screws and ignition coil. Remove 3 screws, and disconnect 3 wires from ignitor terminals.
  2. Remove 2 screws and ignitor. Disconnect 2 connectors from cord clamp. Remove screw and cord clamp. Remove distributor wire from distributor housing. Remove screw and condenser.
Fig 1: Aligning Distributor Cut-Out Marks (Similar)
G119498Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002