October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Clutch Assembly: Installation
- If installing flywheel, apply thread sealant on threads of flywheel bolts before installing. Install and alternately tighten flywheel bolts in a crisscross pattern to specification. See TORQUE SPECIFICATIONS .
- Install clutch disc in clutch cover. Align reference marks on clutch cover and flywheel. Install clutch disc and clutch cover on flywheel.
- Using clutch aligner, center clutch disc on flywheel. Install and alternately tighten clutch cover bolts in a crisscross pattern to specification. See TORQUE SPECIFICATIONS .
- Apply molybdenum disulfide grease to clutch release fork-to-pivot stud contact surfaces, hub on clutch release bearing and clutch disc splines. Install clutch release fork and clutch release bearing on transaxle (if removed).
- To install remaining components, reverse removal procedure. Tighten bolt/nuts to specification. See TORQUE SPECIFICATIONS .
- On 1.6L (4A-FE), install and tighten stiffener plate bolts to specification in sequence. See Fig 3. See TORQUE SPECIFICATIONS . Fill transaxle with 75W-90 gear oil with API GL-4 or GL-5 rating.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002