Retrieving 1-Digit Normal Function Code

Turn ignition on. Push SET/COAST switch to ON position and hold. Set CRUISE ON-OFF (MAIN) switch to ON position. Ensure CRUISE indicator light comes on in combination meter and flashes after 3 seconds. Release CRUISE ON-OFF (MAIN) switch from SET/COAST position. Activate each circuit in order given. If other than a normal function code is displayed, go to appropriate TROUBLE SHOOTING BY SYMPTOM . If normal code is displayed and cruise control is still malfunctioning, go to appropriate TROUBLE SHOOTING BY SYMPTOM . Normal function code will be displayed by CRUISE indicator light as each circuit is activated as follows: