LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1994 >> Supra 2JZ-GE, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crankshaft Position Sensor >> Installation (Turbo)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (Turbo)

Install crankshaft position sensor. Tighten mounting bolt to 78 INCH lbs. (8.8 N.m). Connect crankshaft position sensor connector and install alternator. Connect negative battery cable.

Fig 1: Locating Camshaft & Crankshaft Position Sensors (Turbo)
G93E81079Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals