LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1994 >> T100 Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable. Drain coolant from throttle body. Disconnect air cleaner hose. Disconnect accelerator cable, cruise control cable with bracket, and throttle cable (A/T) from throttle body linkage. Label and disconnect emission control vacuum hoses from throttle body. Remove accelerator cable bracket. Disconnect throttle position sensor connector. Remove throttle body, and disconnect coolant by-pass hoses from throttle body.
  2. To install, reverse removal procedure. Tighten throttle body bolts to 13 ft. lbs. (18 N.m). Fill with coolant. Connect negative battery cable. Check for fuel leakage. See CHECKING FOR FUEL LEAKS.
scientia non olet · About LEMON Manuals