Indicator Light
Remove combination meter. Locate 16-pin "A" and 13-pin "B" connectors at rear of combination meter. Connect battery positive lead to terminal A14 (Light Green/Red wire) and battery negative lead to terminal B2 (White/Black ground wire). If indicator light does not come on, replace light. If indicator light comes on, inspect wire harness and connectors between indicator light and ATS ECU. See TESTING ANTI-THEFT CIRCUITS . Repair harness or connectors as necessary. If harness and connectors are okay, replace ATS ECU.
NOTE:
For other anti-theft or door lock components, see DOOR LOCKS - POWER
article in the ACCESSORIES/SAFETY EQUIPMENT section.