LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1994 >> Tercel Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Injectors & Fuel Rails >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injectors & Fuel Rails: Removal

  1. Disconnect negative battery cable. Remove air cleaner cap and hose. Disconnect accelerator cable. Disconnect throttle cable (A/T). Disconnect vacuum sensing hose from fuel pressure regulator.
  2. Release fuel pressure at filter. See FUEL SYSTEM PRESSURE RELEASE. Disconnect fuel return hose from fuel return pipe. Disconnect fuel return pipe from fuel pressure regulator.
  3. Disconnect fuel inlet pipe from fuel rail. Disconnect injector connectors. Remove fuel rail with injectors attached. Remove 2 spacers and 4 injector insulators from cylinder head.
Fig 1: Proper Injector Installation Into Fuel Rail (Typical)
G119514Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals