Disabling & Activating Air Bag System
WARNING:
Before any repairs are performed on air bag equipped models, disconnect and shield negative battery cable. Wait at least 90 seconds after disconnecting battery cable before performing any repairs. Air bag system retains enough voltage to deploy air bag for a short time after disconnecting power. Use caution when working around steering column. Air bag could deploy.
To disable air bag system, ensure ignition switch is in LOCK position and negative battery terminal is disconnected for at least 90 seconds before attempting any repair. DO NOT apply electrical power to any component on steering column without disconnecting air bag control unit. Information labels are attached to air bag components. Follow all notices on labels. See the AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES/SAFETY EQUIPMENT section.