LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1995 >> Avalon XLS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Camshaft Position Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect electrical connector at camshaft position sensor. Camshaft position sensor is located on rear corner of front cylinder head, just below valve cover. See Fig 1. Remove bolts and camshaft position sensor from cylinder head.
  2. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Locating Camshaft Position Sensor
G96G10856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals