LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1995 >> Corolla Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.6L >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Air Intake Chamber Cover Bolt/Nut (1) 14 (19)
Distributor Hold-Down Bolt 15 (20)
ECT Sensor (2)
EGR Gas Temperature Sensor (2)
EGR Pipe-To-EGR Valve Nut (4A-FE) 43 (58)
Fuel Inlet Hose-To-Fuel Rail Union Bolt 21 (29)
Fuel Outlet Line-To-Fuel Pump Mounting Bracket 22 (30)
Fuel Rail-To-Intake Manifold Bolt 11 (15)
Main Oxygen Sensor Retaining Nut (2)
Sub-Oxygen Sensor-To-Exhaust Pipe (4A-FE) Calif. (2)
Throttle Body Bolt/Nut 16 (22)
Vehicle Speed Sensor Retaining Bolt (2)
INCH Lbs. (N.m) 
EGR Valve Retaining Nut 115 (13.0)
Fuel Pressure Regulator Bolt 82 (9.3)
Fuel Pump Mounting Bracket-To-Fuel Tank Bolt 30 (3.4)
PNP Switch Retaining Bolt 48 (5.4)
PNP Switch Retaining Nut 106 (12.0)
(1) Tighten bolts/nuts to specification in sequence. See Figure.
(2) Information not available at time of publication.