LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1995 >> Paseo Standard >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Specifications >> Ignition System >> Distributor Sensors
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Distributor Sensors

DISTRIBUTOR PICK-UP COIL AIR GAP

Application In. (mm)
Calif. (1) *
Except Calif. .008-.016 (.20-.40)
(1) Distributorless Ignition System (DIS) is used.
DISTRIBUTOR PICK-UP COIL RESISTANCE

Application (1) Pick-Up Coil Terminals Ohms
Calif. (2) (2) *
Ex. Calif.
Cold (3) G+ & G- 185-275
Cold (3) NE+ & NE- 370-550
Hot (4) G+ & G- 240-325
Hot (4) NE+ & NE- 475-650
(1) For proper testing and terminal identification, see the BASIC TESTING article.
(2) Distributorless Ignition System (DIS) is used.
(3) Cold is with temperature of 14-122°F (-10-50°C).
(4) Hot is with temperature of 122-212°F (50-100°C).
CAMSHAFT POSITION SENSOR RESISTANCE

Application Ohms
Calif. Only
Cold (1) 985-1600
Hot (2) 1265-1890
(1) Cold is with temperature of 14-122°F (-10-50°C).
(2) Hot is with temperature of 122-212°F (50-100°C).
CRANKSHAFT POSITION SENSOR RESISTANCE

Application Ohms
Calif. Only
Cold (1) 985-1600
Hot (2) 1265-1890
(1) Cold is with temperature of 14-122°F (-10-50°C).
(2) Hot is with temperature of 122-212°F (50-100°C).
scientia non olet · About LEMON Manuals