LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1995 >> Pickup Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 2.4L >> Fuel System >> Cold Start Injector >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cold Start Injector: Installation

  1. To install, reverse removal procedure using NEW gaskets. Tighten cold start injector bolts and union bolts for cold start injector fuel pipe to specification. See TORQUE SPECIFICATIONS .
  2. Operate fuel pump and check for fuel leaks. See FUEL PUMP OPERATION under FUEL SYSTEM in BASIC TESTING - 2.4L article.
scientia non olet · About LEMON Manuals