LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1995 >> Tercel Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rails & Fuel Injectors >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Rails & Fuel Injectors: Removal

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  under FUEL SYSTEM. Disconnect vacuum hose from fuel pressure regulator. Disconnect fuel return hose from end of fuel rail. Refer to Figure.
  2. Disconnect clamp on engine wire from engine hanger. Remove union bolt, gaskets and disconnect fuel inlet hose from end of fuel rail. Note location of electrical connectors on fuel injectors for installation reference. Disconnect electrical connectors at fuel injectors.
    CAUTION: When removing fuel rail, use care not to allow fuel injectors to fall from fuel rail.
  3. Remove fuel rail-to-cylinder head bolts. Remove fuel rail with fuel injectors. Remove fuel injectors from fuel rail. Remove insulators and spacers from cylinder head. Remove "O" rings and grommets from fuel injectors.
scientia non olet · About LEMON Manuals