LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1996 >> 4Runner Base, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 2.7L >> Fuel System >> Fuel Pump >> Disassembly & Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly & Reassembly

  1. Disconnect electrical connector for fuel gauge sending unit from fuel pump mounting bracket. Remove screws and fuel gauge sending unit from fuel pump mounting bracket.
  2. Pull bottom of fuel pump from fuel pump mounting bracket. Disconnect electrical connector at fuel pump. Disconnect fuel hose at top of fuel pump. Remove fuel pump with rubber cushion, located at bottom of fuel pump, from fuel pump mounting bracket.
  3. Using small screwdriver, remove retaining clip that holds fuel filter on bottom of fuel pump. Remove fuel filter from fuel pump.
  4. Remove screws and electrical connector assembly with gasket from fuel pump mounting bracket (if necessary).
  5. To reassemble remaining components, reverse disassembly procedure using NEW retaining clip on fuel filter and gasket for electrical connector (if equipped).
scientia non olet · About LEMON Manuals