Rear Wiper Switch Test
With wiper switch in specified position, ensure continuity exists between terminals listed. See REAR WIPER/WASHER SWITCH CONTINUITY TEST table. See Figure. Replace complete wiper switch if continuity is not as specified.
REAR WIPER/WASHER SWITCH CONTINUITY TEST
| Switch Position | (1) Terminals | Continuity | |||
|---|---|---|---|---|---|
| Corolla | |||||
| Off | B1, B2, B10, B16 | No | |||
| Intermittent | B10 & B16 | Yes | |||
| On | B1 & B16 | Yes | |||
| Wash | |||||
| W/Wiper On | B2 & B16 | Yes | |||
| W/Intermittent On | B1, B2 & B16 | Yes | |||
|
|||||