LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1996 >> Previa DX, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Component Testing >> Pump Motor Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pump Motor Relay

  1. Remove pump motor relay, located on actuator. Using a DVOM, check continuity between specified terminals. Continuity should not exist between relay terminals No. 1 and 2. Continuity should exist between relay terminals No. 3 and 4. Using fused jumper wire, connect positive battery terminal to pump motor relay terminal No. 4. Connect negative battery terminal to pump motor relay terminal No. 3. See Figure.
  2. Continuity should exist between relay terminals No. 1 and 2. Continuity should not exist between relay terminals No. 1 and 4. If continuity is not as specified, replace pump motor relay.
scientia non olet · About LEMON Manuals