Park/Neutral Switch Continuity Check
Disconnect electrical connector from park/neutral switch at transmission or transaxle. Using ohmmeter, check for continuity at specified terminals with gearshift in proper positions. See Fig 1 or Fig 2 . See PARK/NEUTRAL SWITCH CONTINUITY SPECIFICATIONS table. Replace switch if defective.
PARK/NEUTRAL SWITCH CONTINUITY SPECIFICATIONS
| Gearshift Position | Continuity Between Terminals | |
|---|---|---|
| Non-Supercharged | ||
| Park | "B" & "N", "C" & PL | |
| Reverse | "C" & RL | |
| Neutral | "B" & "N", "C" & NL | |
| Drive | "C" & DL | |
| 2 | "C" & 2L | |
| Low | "C" & LL | |
| Supercharged | ||
| Park | 5 & 6, 4 & 7 | |
| Reverse | 4 & 8 | |
| Neutral | 5 & 6, 4 & 10 | |
| Drive | 4 & 9 | |
| 2 | 4 & 2 | |
| Low | 4 & 3 | |