Throttle Body: Removal
- Drain cooling system. Disconnect necessary electrical connectors, wires and hoses for removal of air cleaner upper cap assembly. Disconnect air cleaner hose at throttle body. Remove air cleaner upper cap assembly and air cleaner hose.NOTE: On models using only bolts on the throttle body, note bolt length and location for reassembly reference. Longer bolts must be installed at top of throttle body.
- Disconnect control cables, air hoses, coolant hoses, vacuum hoses and electrical connectors at throttle body. Remove bolts/nuts, throttle body and gasket. Remove Idle Air Control (IAC) valve and gasket from throttle body (if necessary).