LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1996 >> Supra 3.0 E >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Specifications >> Ignition System >> Distributor Sensors
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Distributor Sensors

DISTRIBUTOR PICK-UP COIL AIR GAP

Application In. (mm)
Non-Turbo .008-.020 (.20-.50)
Turbo (1)
(1) Distributor Less Ignition System (DIS) is used.
DISTRIBUTOR PICK-UP COIL RESISTANCE

Application (1) Pick-Up Coil Terminals Ohms
Non-Turbo
Cold (3) G1 & G- 125-200
Cold (3) G2 & G- 125-200
Cold (3) NE & G- 155-250
Hot (4) G1 & G- 160-235
Hot (4) G2 & G- 160-235
Hot (4) NE & G- 190-290
Turbo (2) (2) *
(1) For proper testing and terminal identification, see the BASIC TESTING article.
(2) Distributorless Ignition System (DIS) is used.
(3) Cold is with temperature of 14-122°F (-10-50°C).
(4) Hot is with temperature of 122-212°F (50-100°C).
CAMSHAFT POSITION SENSOR RESISTANCE

Application Ohms
Turbo
Aisan Sensor
Cold (1) 985-1600
Hot (2) 1265-1890
Nippondenso Sensor
Cold (1) 835-1400
Hot (2) 1060-1645
(1) Cold is with temperature of 14-122°F (-10-50°C).
(2) Hot is with temperature of 122-212°F (50-100°C).
CRANKSHAFT POSITION SENSOR RESISTANCE

Application Ohms
Non-Turbo
Cold (1) 1630-2740
Hot (2) 2065-3225
Turbo
Cold (1) 835-1400
Hot (2) 1060-1645
(1) Cold is with temperature of 14-122°F (-10-50°C).
(2) Hot is with temperature of 122-212°F (50-100°C).
scientia non olet · About LEMON Manuals