LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1997 >> 4Runner Base, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 2.7L >> Fuel System >> Fuel Pump >> Disassembly & Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly & Reassembly

  1. Remove wiring harness for fuel pump. See Figure. Disconnect electrical connector for fuel gauge sending unit from fuel pump mounting bracket. Remove screws and fuel gauge sending unit from fuel pump mounting bracket.
  2. Pull bottom of fuel pump from fuel pump mounting bracket. Disconnect fuel hose at top of fuel pump. Remove fuel pump with rubber cushion from fuel pump mounting bracket. Remove rubber cushion from bottom of fuel pump.
  3. Using small screwdriver, remove retaining clip that holds fuel filter on bottom of fuel pump. Remove fuel filter from fuel pump.
  4. Remove screws and electrical connector assembly with gasket from fuel pump mounting bracket (if necessary).
  5. To reassemble, reverse disassembly procedure using NEW retaining clip on fuel filter and gasket for electrical connector (if equipped).
scientia non olet · About LEMON Manuals