LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1997 >> Corolla Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Circuit Testing >> Test No. 14: Trouble Code Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test No. 14: Trouble Code Circuit

  1. Locate Black DLC1 on driver side strut tower in engine compartment. Connect voltmeter positive lead to terminal Tc and negative lead to terminal E1. See Figure. Turn ignition switch to ON position and ensure battery voltage exists between DLC1 terminals. If voltage is as specified, go to test for next trouble code displayed or appropriate symptom under TROUBLE SHOOTING BY SYMPTOM  under TROUBLE SHOOTING.
  2. If voltage is as specified, ensure no short or open exists in harness or connectors between CC ECU and DLC1 or between DLC1 and ground. If harness and connectors are not okay, repair as necessary and retest system. If harness and connectors are okay, check CC ECU. See PIN VOLTAGE TESTS . If found to be defective, replace CC ECU and retest system.
scientia non olet · About LEMON Manuals