October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Circuit Opening Relay
- Ensure ignition is off. Remove circuit opening relay. See CIRCUIT OPENING RELAY LOCATION table. See Fig 1.
CIRCUIT OPENING RELAY LOCATION
| Application |
Relay Location |
| Previa |
In Fuse/Relay Box At Top Center Of Instrument Panel, Near Windshield |
- To check circuit opening relay continuity, use ohmmeter to check continuity between specified terminals. See Fig 2.
- To check circuit opening relay operation, apply battery voltage and ground to relay and use ohmmeter to check continuity between specified terminals. See Fig 2. Replace circuit opening relay if defective.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002