Power Window Switch Continuity Test (Driver's Side Switch)
Using an ohmmeter, check continuity between specified terminals with driver's side power window switch in specified position. See DRIVER'S SIDE POWER WINDOW SWITCH CONTINUITY TEST table. See Fig 1. If continuity does not exist at specified terminals, replace power window switch.
DRIVER'S SIDE POWER WINDOW SWITCH CONTINUITY TEST
| Application & Position | (1) Terminals No. | ||||
|---|---|---|---|---|---|
| Driver's Side Switch | |||||
| Locked & Unlocked | |||||
| UP | 1 & 2; 3 & 6 | ||||
| OFF | 1 & 2; 1 & 6 | ||||
| DOWN | 1 & 6; 2 & 3 | ||||
| Passenger's Side Switch | |||||
| Locked | |||||
| UP | 3 & 5 | ||||
| OFF | 4 & 5 | ||||
| DOWN | 3 & 4 | ||||
| Unlocked | |||||
| UP | 1 & 4; 3 & 5 | ||||
| OFF | 1 & 4; 1 & 5 | ||||
| DOWN | 1 & 5; 3 & 4 | ||||
|
|||||