Fuel System Pressure Release
WARNING:
ALWAYS release fuel pressure before disconnecting any fuel injection-related component. DO NOT
allow fuel to contact engine or electrical components.
- Disconnect electrical connector for electric fuel pump. See FUEL PUMP ELECTRICAL CONNECTOR LOCATION table. Electric fuel pump is located in the fuel tank.FUEL PUMP ELECTRICAL CONNECTOR LOCATION
Application Connector Location Previa Near Fuel Filter - Start engine and allow engine to idle until engine stalls. Turn ignition off. Disconnect negative battery cable.
- Place suitable container under fuel line connection. Cover fuel line connection with shop towel. Slowly loosen fuel line connection, allowing fuel pressure to be released. Once fuel pressure is released, fuel system components may be serviced.