Cruise Control Systems DTCS

CRUISE CONTROL SYSTEMS DTCS

OEM Code

Test Procedures

Description

⁽²⁾, 4 ⁽⁴⁾

Overcurrent/Short In Motor Circuit

⁽²⁾,4 6 ⁽⁴⁾

Open In Magnetic Clutch Ckt Or Overcurrent/Short In Magnetic Clutch Circuit

⁽²⁾,4 ⁽⁴⁾

Potentiometer Circuit Open Or Shorted

⁽²⁾,4 ⁽⁴⁾

Mechanical Trouble (With Open In Motor Ckt)

⁽²⁾,4 ⁽⁴⁾

Close Side Open Trouble (Motor Disconnected)

⁽²⁾,5 ⁽⁴⁾

Open In Vehicle Speed Sensor Signal Ckt

23 ⁽⁵⁾

⁽²⁾,5 ⁽³⁾, ⁽⁴⁾

Vehicle Speed Sensor Signal Abnormal

⁽²⁾,3 ⁽⁴⁾

Short In Control Switch Circuit

⁽⁴⁾

Continuous Current In Open Motor Circuit

1 3 ⁽²⁾, ⁽⁴⁾

Mechanical Trouble At Low Voltage

⁽²⁾,3 ⁽⁴⁾

Actuator Power Supply Abnormal

Normal

⁽²⁾,3 6 7 ⁽³⁾,4 ⁽⁴⁾

Indicator Light Flashes 5 Times, CC System Cannot Be Set Or Does Not Operate

⁽¹⁾	Perform test numbers in order given.

⁽²⁾	Check wiring harness and connectors.

⁽³⁾	Check speed control cable function.

⁽⁴⁾	Check CC ECU. See PIN VOLTAGE TESTS Replace CC ECU as necessary.

⁽⁵⁾	If speed set can be maintained when speed control switch is again set to SET/COAST position, there is no malfunction.