Diagnosis & Repair
- Connect scan tool. See Figure. Start and warm engine to normal operating temperature. Drive vehicle at 31-40 MPH for 5-10 minutes. Stop vehicle. Retrieve codes. See SELF-DIAGNOSTIC SYSTEM .
- If codes other than P0420 are present, diagnose and repair those codes first. If only DTC P0420 is displayed, check sensor No. 1 circuits. See DTC P0130: HEATED OXYGEN SENSOR FAULT (SENSOR NO. 1) circuit test. Repair as necessary. If oxygen circuits are okay, go to next step.
- Check sensor No. 2 circuits. See DTC P0136: HEATED OXYGEN SENSOR CIRCUIT (SENSOR NO. 2) circuit test. Repair as necessary. If oxygen circuits are okay, replace catalytic converter and retest.