LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1998 >> Supra 3.0 D >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Computerized Engine Controls >> Engine Control Module (ECM) >> Removal & Installation (Turbo)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Turbo)

  1. The ECM is located below passenger's side of instrument panel, underneath carpet on the floor, just below the glove box. Ensure ignition is off. Disconnect negative battery cable.
  2. Remove passenger's side door scuff plate. Remove carpet below instrument panel on passenger's side for access to ECM protector and ECM. Remove nuts, ECM protector and ECM. Fully loosen bolt and disconnect electrical connectors from ECM.
  3. To install, reverse removal procedure. Ensure electrical connectors are fully seated on ECM after bolt is tightened.
scientia non olet · About LEMON Manuals