Wiper/Washer Switch Test
With wiper switch in specified position, ensure continuity exists between specified terminals. See WIPER/WASHER SWITCH CONTINUITY TEST table. See Fig 1. Replace wiper switch assembly if continuity is not as specified.
WIPER/WASHER SWITCH CONTINUITY TEST
| Switch Position | (1) Terminals No. | ||
|---|---|---|---|
| Off | 7 & 16 | ||
| Intermittent | 7 & 16 | ||
| Low | 7 & 17 | ||
| High | 8 & 17 | ||
| Washer ON | 2 & 11 | ||
|
|||