EFI Main Relay
NOTE:
EFI main relay may also be referred to as EFI relay.
- Ensure ignition is off. Remove EFI main relay. See EFI MAIN RELAY LOCATION table.EFI MAIN RELAY LOCATION
Application Location Camry, Camry Solara & Celica In Fuse/Relay Box At Driver's Side Front Corner Of Engine Compartment, Near Battery Corolla In Fuse/Relay Box At Driver's Side Front Corner Of Engine Compartment, Near Strut Tower RAV4 In Fuse/Relay Box Behind Driver's Side Of Instrument Panel, Next To Steering Column, Or In Fuse/Relay Box At Driver's Side Front Corner Of Engine Compartment Tacoma & 4Runner In Fuse/Relay Box At Driver's Side Front Corner Of Engine Compartment, Near Battery - To test EFI main relay continuity, use ohmmeter to check for continuity and no continuity between specified terminals on EFI main relay. See Figure-Fig 3 .
- To test EFI main relay operation, apply battery voltage and ground to EFI main relay and use ohmmeter to check for continuity between specified terminals on EFI main relay. See Figure-Fig 3 . Replace EFI main relay if defective.