Adjusting Method For Jam Protection

WARNING: This page is about a different car, the 1999 Toyota Tacoma, 1999 Toyota Sienna, 1999 Toyota RAV4, 1999 Toyota Land Cruiser, and 1999 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Use this procedure when power window motor has been replaced or when power window motor has been run while removed from vehicle.

To adjust limit switch to OFF position, connect motor to harness connector and operate power window motor in UP direction for 4-5 seconds. This sets limit switch to full UP position (OFF).