DTC P0120: Throttle Position (TP) Sensor Circuit: Notes

CAUTION: If ECM replacement is instructed in following tests, always ensure ECM connectors and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction.

NOTE: If DTCs P0100, P0101, P0110, P0115 and P0120 are output together, inspect ECM E2 circuit (sensor ground) between terminal No. 18 (Brown wire) at ECM harness connector E4 and splice E2. Repair as necessary. See WIRING DIAGRAMS article.

NOTE: For component location, see appropriate illustration in THEORY & OPERATION article.