Connecting Rod Bearing

Connecting Rod Bearing
Standard oil clearance: 0.016 - 0.040 mm (0.0006 - 0.0016 inch)
Maximum oil clearance: 0.06 mm (0.0024 inch)
If the oil clearance is greater than maximum, replace the bearings. If necessary, grind or replace the crankshaft.

HINT: If replacing a bearing, replace it with one having the same number as marked on the connecting rod. There are 3 sizes of standard bearings, marked "1", "2" and "3" accordingly.








Reference
Standard Bearing Center Wall Thickness


Connecting Rod Bearing Center Wall Thickness
Reference:
Mark 1 1.488 - 1.492 mm (0.0586 - 0.0587 in.)
Mark 2 1.492 - 1.496 mm (0.0587 - 0.0589 in.)
Mark 3 1.496 - 1.500 mm (0.0006 - 0.0016 in.)