Circuit Description

Mass Airflow (MAF) meter uses a platinum hot wire maintained at a constant temperature. Airflow past sensor affects temperature and current flow through MAF meter. MAF meter may also be referred to as airflow meter. DTC is set when ECM detects either throttle valve is fully closed and MAF meter output is more than 2.2 volts for more than 10 seconds with engine speed of 900 RPM or less, or VTA circuit signal is .63 volt or more and MAF meter output is less than 1.06 volts for more than 10 seconds with engine speed of 1500 RPM or more. Possible cause is defective MAF meter.