DTC 11 & DTC 12: Abs Control (Solenoid) Relay Circuit: DTC Detecting Condition

Detection of following conditions may set DTC 11 or DTC 12 if condition occurs for .2 seconds or more:

• If voltage at ABS control relay connector terminal A9-1 is less than 1.5 volts and voltage at connector terminal A9-5 is zero volts, DTC 11 may set.
• If voltage at ABS control relay connector terminal A9-1 is 10-14 volts and voltage at connector terminal A9-5 is 10-14 volts, DTC 12 may set.