Circuit Description
WARNING: This page is about a different car, the 2000 Toyota ECHO. However, it is still accessible from the selected car via links, so may be relevant.
CKP sensor is a pick-up coil mounted next to crankshaft pulley. A 34-tooth signal plate is mounted to crankshaft. DTC P0335 is set if no cranking signal is received by ECM from sensor. DTC P1335 is set if no engine running signal is received by ECM from CKP sensor. Possible causes are:
- CKP sensor circuit is open or shorted.
- Defective CKP sensor.
- Defective signal plate.
- Defective ECM.