LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2000 >> RAV4 Base, AWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Charging System - Generators & Regulators) >> Bench Testing >> Diodes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bench Testing: Diodes

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2001 Toyota Tundra, 2001 Toyota Tacoma, 2001 Toyota Sienna, 2001 Toyota Sequoia, and 2001 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. With diode/rectifier assembly removed and on bench, contact positive diode plate terminal with one ohmmeter probe. Using other ohmmeter probe, contact each diode lead in same plate. Note ohmmeter reading. Reverse ohmmeter probes, and repeat tests for all diodes.
  2. All diodes should show continuity in one direction and no continuity in opposite direction. If any diode is defective, replace diode/rectifier assembly.
scientia non olet · About LEMON Manuals