LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2000 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Trouble Shooting >> Cruise Control Function Test >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Function Test: Notes

NOTE: Before performing CRUISE CONTROL FUNCTION TEST, perform DIAGNOSTIC PROCEDURE  under SELF-DIAGNOSTIC SYSTEM. Cruise control function test should only be performed if no self-diagnostic trouble codes are present.

Cruise control function test is used to help determine if cruise control circuits are functioning properly when no trouble codes are present. To activate function test, turn ignition on. Push cruise control switch to SET/COAST position and hold. Set cruise ON-OFF (main) switch to ON position. Ensure CRUISE indicator light comes on and flashes after 3 seconds. Release cruise control switch from SET/COAST position. Activate each switch circuit in order given. Normal function code will be displayed by CRUISE indicator light, as each circuit is activated as follows:

scientia non olet · About LEMON Manuals