LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2000 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures - 4-Cylinder >> Fuel Systems >> Fuel Pump Control Circuit >> Circuit Opening Relay (4Runner)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Opening Relay (4Runner)

Circuit opening relay controls fuel pump circuit. When EFI main relay is energized, EFI main relay provides battery voltage to both sides of circuit opening relay. When proper input signals are delivered to Engine Control Module (ECM), circuit opening relay ground circuit is grounded at ECM terminal FC. Circuit opening relay then provides voltage to fuel pump for fuel pump operation. For circuit opening relay location, see CIRCUIT OPENING RELAY LOCATION  table.

CIRCUIT OPENING RELAY LOCATION (1)

Application (2) Location
Camry CNG & Gasoline Models, & Camry Solara In Fuse/Relay Box At Driver's Side Front Corner Of Engine Compartment, Near Battery & Air Cleaner
Celica In Fuse/Relay Box At Driver's Side Front Corner Of Engine Compartment, Just In Front Of Strut Tower, Near Battery
Corolla Center Relay In Relay Box Behind Driver's Side Kick Panel
Echo In Fuse/Relay Box Behind Driver's Side Of Instrument Panel
RAV4 Top Rear Relay In Relay Box Below Driver's Side Of Instrument Panel, Behind Kick Panel
Tacoma Behind Lower Instrument Panel Cover, Next To Driver's Side Of Steering Column
4Runner Below Right Corner Of Fuse/Relay Box, Behind Lower Instrument Panel Cover At Driver's Side Of Instrument Panel To Left Of Steering Column, Just Above Hood Release Lever
(1) Circuit opening relay may be marked as CIR OPN relay.
(2) Circuit opening relay may also be identified by appropriate illustration in SYSTEM & COMPONENT TESTING - 4-CYLINDER article.