DTC P0106: Manifold Absolute Pressure (Map)/Barometric Pressure Sensor Circuit Range/Performance: Notes

NOTE: If DTCs P0105, P0106, P0110, P0115 and P0120 are output together, check circuit E2 (Brown wire) between terminal No. 9 at ECM harness connector E5 and junction connector J8. Repair as necessary. See WIRING DIAGRAMS article.

NOTE: If DTCs P0105 and P0106 are output together, an open may exist in MAP sensor circuit. Perform DTC P0105: MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE SENSOR CIRCUIT test before performing DTC P0106 test.