Cruise Control Function Test: Notes

NOTE: Before performing CRUISE CONTROL FUNCTION TEST, perform DIAGNOSTIC PROCEDURE under SELF-DIAGNOSTIC SYSTEM. Cruise control function test should only be performed if no self-diagnostic trouble codes are present.

Cruise control function test is used to help determine if cruise control circuits are functioning properly when no trouble codes are present. To activate function test, turn ignition on. Place cruise control switch to SET/COAST position and hold. Turn cruise ON-OFF switch to ON position. Ensure CRUISE indicator light comes on and flashes after 3 seconds. Release cruise control switch from SET/COAST position. Activate each switch circuit in order given. Normal function code will be displayed by CRUISE indicator light, as each circuit is activated.