Circuit Description

Air/Fuel (A/F) sensors monitor exhaust gas oxygen content and delivers an input signal to ECM. ECM uses input signal to control air/fuel ratio. A/F sensors include a heater. DTC is set when A/F sensor output does not change with engine speed at 1500 RPM or more, vehicle speed at 25-62 MPH and throttle valve not fully closed for at least 140 seconds. Possible causes are:

• A/F sensor circuit is open or shorted.
• Defective A/F sensor (bank No. 1 or 2, sensor No. 1).
• Air induction system malfunction.
• Improper fuel pressure.
• Defective fuel injector.
• Exhaust system leak.
• Running vehicle out of fuel.
• Defective ECM.