October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Headlight Control Switch
- Remove necessary steering column covers for access to headlight control switch. See Figure. Disconnect 13-pin electrical connector from headlight control switch.
- Using ohmmeter, check that no continuity and continuity between specified electrical terminals on headlight control switch in relation to headlight control switch position. See HEADLIGHT CONTROL SWITCH CONTINUITY table. See Fig 1. Replace headlight control switch if defective. See HEADLIGHT CONTROL SWITCH under REMOVAL & INSTALLATION.
HEADLIGHT CONTROL SWITCH CONTINUITY
| Switch Position |
Switch Terminals No. |
Specification |
| OFF |
|
|
| TAIL |
10 & 13 |
Continuity |
| HEAD |
10 & 13; 11 & 12 |
Continuity |
| LOW BEAM |
8 & 11 |
Continuity |
| HIGH BEAM |
9 & 11 |
Continuity |
| FLASH |
9 & 11 |
Continuity |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002